Specification support

GORE-TEX — Place the technical question in context

Method
Name the standard and the edition if you have them.
Specimen
Describe layer count, finish and whether the piece was washed.

Before you send

Buyers comparing unbranded membrane swatches at a specification table
Technical inquiry context
Material Face, membrane or coating, backing, GSM and usable width.
Method Standard, edition year and specimen state.
Scope Which result or requirement needs a second reading?

Reply routing uses the form beside this note. Write the message as a specification, not as a slogan. Start with the build: face fibre, denier or dtex, weave, and whether you are looking at a 2-layer, 2.5-layer or 3-layer laminate. If the functional layer was described to you as ePTFE or as ePE, copy that wording and add the backing. A target GSM belongs on its own line, with the unit g/m2, and usable width belongs on the next line in centimetres so the selvedge is not mistaken for cuttable cloth.

Then name one exposure. Driving rain, alpine output and repeated stuffing ask for different records. If you already hold a sheet, cite the method family rather than a naked number: hydrostatic pressure, a Ret result, a named JIS L 1099 procedure, or a Martindale end point. Say whether the specimen was as received or after a wash, and whether seam tape was in the piece. Leave unknown lines blank. Quantity and destination can sit at the end when you want a commercial reading, including a price conversation, but they do not replace the construction note.

This desk does not publish a street address, a switchboard or office hours. The form is the route for the question. Finished garments and footwear are outside the material scope, so describe the textile rather than a style number from a retail jacket.

Send the specification question

Separate the target you want from any result already in a report.